HP P244 Disassembly Instructions Manual

HP P244 Disassembly Instructions Manual

End-of-life disassembly. 23.8-inch monitor

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: External Options Monitor and Display
Marketing Name / Model
[List multiple models if applicable.]
HP P244 23.8-inch Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
IF BD, Power BD
All types including standard alkaline, coin or button style
batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps Panel
AC power cord , HD cable, HDMI cable, VGA cable
HPI instructions for this template are available at
HP's Sustainability
Contact.
] screws
] snaps
] adhesive
] other. Explain
EL-MF877-01
Quantity of
items
included in
product
2
0
0
0
1
0
0
0
4
0
0
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for HP P244

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP P244 23.8-inch Monitor Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Quantity of items Item Description Notes included in product Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances...
  • Page 3 Safari Cheetah P244 Disassemble Process Prepare By: Jove Liu Date : 2018/12/06...
  • Page 4 1.Remove Cable From Display Head 1.Remove cable from display head...
  • Page 5 2.Remove Stand Base From Display Head 2.Push the red point 3.Remove stand base assembly...
  • Page 6 3.Remove Rear Cover From Display Head 4.Release the six screw from rear cover by 5.Remove rear cover cross screwdriver cross screwdriver...
  • Page 7 4.Remove Aluminum Foil 6.Remove three Aluminum Foil...
  • Page 8 5.Remove Bracket Assembly From Display Head 8.Remove the interface cable and 7.Release two screws and remove the OSD cable LED cable 9.Remove Bracket Assembly...
  • Page 9 6.Remove Middle Cover From Display Head 11.Remove middle cover 10.Release all the screws by cross screwdriver...
  • Page 10 7.Disassemble Bracket Assembly 1.Remove black Mylar...
  • Page 11 7.Disassemble Bracket Assembly 2.Release the four screws from bracket 3.Release the five screws from BD by cross screwdriver by cross screwdriver 4.Remove interface and power BD...
  • Page 12 7.Disassemble Bracket Assembly 4.Remove EMI gaskets and white Mylar...
  • Page 13 8.Disassemble Mid-cover Assembly 1.Remove OSD BD 3.Remove lens 2.Remove OSD KEY...
  • Page 14 9.Disassemble Rear-cover Assembly 1.Release two screws by cross 2.Remove wall mount screwdriver...
  • Page 15 10.Disassemle Stand Assembly 21.Release the four screws by cross 20.Push the release button then remove screwdriver the stand 22.Remove hinge from stand 23.Release four screws from hinge by cross screwdriver...
  • Page 16 10.Disassemle Stand Assembly 25.Remove all part 24.Release the two screws and nut from hinge by cross screwdriver...
  • Page 17 11.Disassemble Base Assembly 26.Remove the five rubbers 27.Release eleven screws by cross screwdriver 28.Remove the chassis...
  • Page 18 12.Disassemble Panel Assembly 01. Back side Shielding disassembly Use cross screwdriver to unlock the two screws...
  • Page 19 12.Disassemble Panel Assembly 02. Back side Source board disassembly Lift up the source board that stick by double tape...
  • Page 20 12.Disassemble Panel Assembly Film 03. Front side OC disassembly Note:there will be residual gum on the OC and MF. It is easy to tear off by hand.(as next page) Use film to separate the OC and MF...
  • Page 21 12.Disassemble Panel Assembly residual gum on OC residual gum on MF...
  • Page 22 12.Disassemble Panel Assembly 4. Front side middle frame disassembly loose all the hooks by hand...
  • Page 23 12.Disassemble Panel Assembly 05. Take out 3pcs film carry the suspension loop Note:use hand left and right side to carry the to take out 3pcs suspension loop film left and right side to take out the film...
  • Page 24 12.Disassemble Panel Assembly 06. Take out LGP Use tape to stick one bottom corner of the LGP, note:use hand then take it out to hold the two sides when take out LGP...
  • Page 25 12.Disassemble Panel Assembly 07. Take out reflector Use tape to stick one bottom corner of the reflector plate, then take it out...
  • Page 26 12.Disassemble Panel Assembly 08. Take out light bar note:Light bar can’t be reused use knife to separate after take out light bar and BC then take out light bar...
  • Page 27: Thank You

    Thank You !!!

Table of Contents