Download Print this page
HP ProDisplay P201 Product End-Of-Life Disassembly Instructions

HP ProDisplay P201 Product End-Of-Life Disassembly Instructions

20-inch led backlit monitor
Hide thumbs Also See for ProDisplay P201:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP ProDisplay P201 20-inch LED Backlit Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
3
0
0
1
0
21
1
3
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP ProDisplay P201

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3: Hinge Ass'y

    Mechanical Instructions Step Figure Description The monitor Preparation Remove the Remove the screws to remove the HINGE ASS'Y HINGE ASS'Y. The HINGE The HINGE ASS'Y ASS'Y    ...
  • Page 4 Remove the Remove the REAR_COVER REAR_COVER Tear out all tapes. Remove the Separate the screws and MAINFRAME disconnect the and PANEL connectors to separate the MAINFRAME and PANEL.      ...
  • Page 5 Remove the screws and disconnect the Remove the MAIN BOARD connectors to and POWER remove the MAIN BOARD BOARD and POWER BOARD.    ...
  • Page 6 The bezel The bezel The panel   The panel    ...