Ford Fusion Hybrid 2010 Emergency Response Manual page 8

COMPONENT
1 High-Voltage
Service Disconnect
2 High-Voltage Battery • Located behind the rear
275 Volts
3 High-Voltage Wiring
4 12-Volt Battery
5 Electronically
Controlled
Continuously
Variable Transaxle
(eCVT)
6 DC/DC Converter
7 Electric A/C
Compressor
FCS-14265-10
LOCATION / DESCRIPTION
• Orange rectangle with a molded Provides means to disconnect
plastic handle, about 100 mm
(4 in) in length.
seatback.
• Sealed nickel-metal hydride.
• Runs along the vehicle's
floorpan from the high-voltage
battery to the Electronically
Controlled Continuously
Variable Transaxle (eCVT),
to DC-to-DC converter, then the
electric A/C unit.
• All high-voltage wiring has
orange-colored insulation.
• Located under the hood on
driver side of the vehicle.
• Typical automotive 6-cell
lead/acid design.
• Transverse-mounted design
similar to the non-Hybrid
Fusion/Milan vehicles.
• Contains the traction motor,
generator motor and hybrid
electronics.
• Located under the hood on
the passenger side forward
of the strut tower.
• Located in the front of
the engine.
8
2010 Fusion Hybrid, Milan Hybrid Emergency Response Guide, 02/2009
FUNCTION
high-voltage battery for safely
servicing vehicle.
Provides high-voltage storage
(275 V) for vehicle propulsion
requirements.
Provides physical path for
high-voltage circuitry.
Provides 12-volt power for
vehicle accessories.
Provides delivery of power to
wheels for vehicle propulsion,
generates electricity to re-
charge the batteries during
operation and contains
certain hybrid electronics.
Provides 12 volts of power to
charge the 12-volt battery and
run vehicle accessories.
Provides electric A/C
operation. Replaces the
belt driven A/C compressor.