Setting Up The Eco Interface - Technotherm TPF-Eco Control Manual

2 – Eco Interface
To control your panels via WiFi you need to purchase the Eco Interface WiFi hub. Commands from
the app are received via the router and then the hub sends them to your panels via radio frequency.
The panels retain their connection to the TPF-Eco so that it can monitor the room temperature.
2A – Setting up the Eco Interface
•
Connect the Eco Interface to your router with the supplied ethernet cable.
•
Plug the hub into the mains with the supplied power adaptor.
2B – Setting up the App
•
Install the TYDOM app
•
Press New Home to set up your account
o Add name
o Add location (optional)
o Add Eco Interface identifier – last 6 digits of code on base
of Eco Interface.
o Press Add
o Add a password and press Connection
Note – NOT these related apps:
Tydom HD Lifedomus
17/04/2019 – TPF-Eco version u111