Technotherm TPF-Eco Control Manual page 12

Programming
Programming via the app does not take place within each individual panel. Instead, you add all
heating "moments" to one central schedule. These moments include the panels coming on,
switching off and changing to a new temperature. One moment can control any number of panels.
If you have other types of device connected to the app, you can include them in your moments. E.g.
you could tell your panels to come on, your curtains to open and your security lights to switch off all
at the same time!
•
Press Prog .
•
Scroll down the schedule to the time where you want to add a
moment.
•
Tap the time slot. A cross with a green background will appear.
Tap again to proceed.
o Alternatively, press the green cross in the top corner
and press "New moment".
•
Customise your moment:
o Name
o Colour
o Time
▪
o Astronomical Clock
▪
o Recurrence
▪
o Select devices
▪
▪
▪
▪
o Define an action
▪
▪
•
Press Add. The schedule will be populated with your new moment(s).
•
Continue to add moments until your schedule is complete.
Adjust hours and minutes to the specific time you want – i.e.
06:10.
Once activated, this function allows you to select an interval
up to +/- 2 hours before or after sunrise or sunset as your
trigger for a moment.
Select any or all days of the week.
Select any or all of your devices – i.e. which panels you
want to respond to the trigger.
You can also select a Group, if you've created one.
You can also select a Scenario, if you've created one. When
you select a scenario, you do not need to define an action.
You can select any combination of devices, groups and
scenarios.
Set how you want your panels to respond to the trigger.
They can switch off, or switch to any temperature from 10 –
30 °C.
Each panel or group is set individually and can all be
different.
17/04/2019 – TPF-Eco version u111