Changing Cartridges; Compatible Cartridges - jbc NASE-C Series Instruction Manual

Changing cartridges

Save time and change cartridges safely without having to switch the station off.
Removing
1
2
Place the cartridge in the slot
as shown and pull the handle
to remove it.
*Important
It is essential to insert the cartridges as far as the reference for a proper connection.

Compatible cartridges

The NT115-A and AN115-A work with C115 cartridges. Find the model that best suits your soldering
needs on www.jbctools.com
0,2 x 0,1
Conical
Chisel
Inserting
Push the cartridge into the
handle to the mark*.
Reference
ø 0,6
ø 0,3
Conical
Bevel
bent
w w w.jbctools.com
Aligning
Use the holes to rotate
the cartridges for a proper
alignment.
1
0,3
2,5
Stainless
Knife
steel chisel
2,4 x 0,6
High thermal
Ø2,5
performance
11