Table of Contents
Advertisement
Precautions for use
Use pots or pans which
are the right size for the
burner.
Do not use a too small
pot. The flame should not
touch the sides of the pot.
Do not use damaged pots
or pans, which do not sit
evenly on the cooktoop,
they may tip over.
Only use pots or pans with
a thick, flat base.
Do not cook without using
a lid and make sure the lid
is properly fitted. This
saves energy.
Always centre the pot or
pan over the burner,
otherwise it could tip over.
Do not place large pots
near the control knob. It
may get damaged by the
high temperatures.
Place the pots or pans on
the pan support, never
directly on the burner.
Make sure that the burner
parts are correctly
positioned before using
the appliance.
Pots or pans should be
placed on the cooktop
carefully.
Do not strike the cooktop
and do not place
excessive weight on it. Do
not place more than 10kg
or 8 litres on the pan
support.
Cleaning and maintenance
2Cleaning and maintenance
T he following tips give information on how to properly
C l e a n i n g a n d m a i n t e n a n c e
maintain and care for your application. This can help
keep it in good condition and fully functioning.
:
Warning – Risk of burns!
The appliance will become hot during operation. Allow
the appliance to cool down before cleaning.
:
Warning – Risk of electric shock!
Do not use a high-pressure cleaner or steam cleaner to
clean your appliance.
Do not use the following cleaning agents:
Abrasive or rough cleaners
■
Acidic cleaners (e.g. vinegar, citric acid, etc.)
■
Chlorinated cleaners or cleaners with a high alcohol
■
content
Oven spray
■
Hard, scratchy sponges, brushes or scouring pads
■
Wash new sponge cloths thoroughly before use.
■
Clean appliance
Part
Recommended cleaning method
Pan support
Carefully take off pan support for cleaning.
Soak in soapy water. Clean with a brush and
some detergent or put into the dishwasher.
Be careful when cleaning around the rubber
rests to ensure they do not come loose.
Control knobs
Clean with a soft, moist cloth and some soapy
water; do not use too much water.
Caution!
Damage to the appliance
Do not pull off the control knobs to clean them.
Burner parts
Take burner parts off for cleaning. Clean in
soapy water with a cloth and detergent. Use
brass polish to retain the original shiny sur-
face of the burner ring and the burner cover.
Rinse with clear water and dry carefully
before placing them on the burner.
Ignition sparker
Clean carefully with a small brush, if required.
--------
Clean the hob after every use, once it has cooled down.
Remove any spilt liquids immediately, don't let food
burn onto the hob.
Replace burner parts and pan supports once they
1.
have been cleaned and dried.
Make sure all the burner parts are in the correct
2.
position.
Burner ring and burner cover need to click into
Note:
place and sit firmly.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a hob
cleaner from your specialist retailer or our after-sales
service (item number 00311502 or 00311499). It is
suitable for pan supports and the stainless-steel recess.
If necessary, let the dirt soak overnight. Follow the
instructions on the cleaning agent.
Caution!
Do not use the hob cleaner on the burner parts.
en
9
Advertisement
Table of Contents
