Before First Use; Instructions; Insert Batteries - Workzone Step Smart User Manual

Before First Use

Instructions

• Unpack your Step Smart device and check that you have received all the
components according to Pack Contents on page 5
• Remove any packaging material and promotional labels before using your
Step Smart device for the first time
• Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach and disposed of safely
• Ensure you have read and understood all instructions and warnings in this
manual before use. Refer to the Product Overview on page 10 to familiarize
yourself with the product and identify all parts

Insert Batteries

1. Unscrew the battery cover, and insert the batteries (provided), noting the
polarity marked on the back of the device
WARNING: Do not mix old and new batteries. Do not mix Alkaline, Standard
(Carbon - Zinc), Or Rechargeable (Nickel - Cadmium) batteries
• Non-rechargeable batteries are not to be recharged
• Rechargeable batteries are to be removed from the appliance before being
charged
• Batteries are to be inserted with the correct polarity
• Exhausted batteries are to be removed from the appliance and safely
disposed of
• If the appliance is to be stored unused for a long period, the batteries should
be removed
• The supply terminals are not to be short-circuited
2. Screw the battery cover back into place
3. Press the Power button to check that you have installed the batteries
correctly; the LED's will light up and begin flashing. Turn OFF by holding
down the Power button once you have confirmed the batteries are
installed correctly. There will be three short beeps
After Sales Support
1300 663 907
customercare@winplus.com.au
Model Number DY160121
6