Workzone Step Smart User Manual page 12

Set Up
7. To Set Up your device you may need to adjust the position of your ladder
or even the fitment of your device
8. When you have either Green or Red Flashing lights press SET to enter
Active Mode. You will hear 3 confirmation beeps if set up is successful
NOTE:
• Active Mode can be set if:
- The LED lights are Green or Flashing Red - note if set when Flashing Red the
unit will alarm in Active Mode to remind you that your ladder is not level
• Active Mode cannot be set if:
- The LED lights are Two Solid Red Lines – this is too far from level and unsafe
for use
After Sales Support
1300 663 907
customercare@winplus.com.au
Model Number DY160121
12