Set Up Overview - Workzone Step Smart User Manual

Set Up Overview

NOTE: Step Smart is a warning device and is intended to assist with set up and
early notification that your ladder has moved with the aid of visual and audible
warnings. Step Smart does not replace general ladder safety
1. Insert batteries into Step Smart
2. Set up your ladder following your ladder's user manual
3. Mount Step Smart onto your ladder – see Set Up on Page 11
4. Turn Step Smart on, check your ladder is level using Set Up Mode
5. Step Smart's LEDs will flash to indicate level but no alarm will sound
6. Press Set to start Active Mode and begin safe use of your ladder
7. Step Smart will now check for any change in the stability of your ladder
After Sales Support
1300 663 907
customercare@winplus.com.au
Model Number DY160121
10