Table of Contents
Advertisement
Just like the camera driver, running modprobe skxflash inserts the
module to the kernel. Adding skxflash entry on the /etc/modules
file will also enable this module to be loaded at system boot up. The
source
/usr/smartcam/src/skxflash directory. Just make
skxflash.o.
2.5 Library Installation
2.5.1 XFree86
XFree86 is an open source X11-based desktop infrastructure that
provides a client/server interface between the display hardware (the
mouse, keyboard, and video displays) and the desktop environment
while also providing both the windowing infrastructure and a
standardized application interface (API). (http://www.xfree86.org/).
2.5.1.1 XFree86 Installation
The library version used for this system is version 4.4.0. The following
steps below describe how to compile and install the XFree86 application.
Before running startx, do the command below:
To export this path upon system start up, add this path in
/etc/profiles:
PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:/usr/X11R6
/bin
An X11 configuration file is created in /etc/X11/XF86Config.
However configured XF86Config files are already installed on SDK.
XF86Config.en is for US keyboard layout, XF86Config.jp is for JP
keyboard layout.
code
of
the
1. make World
- compiles the said application
2. make install
- copies the required files to where they needed to be
export PATH=$PATH:/usr/X11R6/bin
flash
driver
is
XCI-SX1 SDK / SDK Technical Manual
also
installed
to build
in
14
Advertisement
Table of Contents
