Notes On The Camera Operations - Sony XCD-V50 Technical Manual

Notes on the Camera
Operations
When using Trigger mode
When this camera is set to accept a trigger at the
fastest possible timing, it can accept overlap of the
next trigger signal in the midst of video transmission.
For this reason, a trigger inhibition period is not
available. Thus, if a trigger signal is input before the
CCD can change to the state where it can accept
exposures, multiple exposures can occur, and it cannot
capture the correct image. Make sure that the
following conditions are met when the trigger is
activated.
T
Mode 0: timing after the exposure set by the parameter
Mode 1: at the trailing edge of the trigger pulse
T≥1/30 sec
XCD-V50CR
XCD-V50
T
is finished
Appendix
Appendix
16