Advertisement
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
M
PERATING
ANUAL
Available entries are 0-9, A, B, C, D, E (substitute for "*"), and F (substitute for "#")
Set Mode Item 32 [RESUME]
Function: Selects the Scan Resume mode.
Available Values: BUSY/HOLD/TIME
Default: BUSY
BUSY: The scanner will hold until the signal disappears, then will resume when the carrier
drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
TIME: The scanner will hold for the five seconds, then resume whether or not the other
station is still transmitting.
Set Mode Item 33 [REV/HM]
Function: Selects the function of the [REV(HOME)] key.
Available Values: <REV>/<HOME>
Default: <REV>
<REV>: Pressing the [REV(HOME)] key reverses the transmit and receive frequencies
during repeater operation.
<HOME>: Pressing the [REV(HOME)] key instantly recalls a favorite "Home" channel.
Set Mode Item 34 [RF SQL]
Function: Adjusts the RF Squelch threshold level.
Available Values: S-1/S-2/S-3/S-4/S-5/S-6/S-8/S-FULL/OFF
Default: OFF
Set Mode Item 35 [RPT.MOD]
Function: Sets the Repeater Shift Direction.
Available Values: RPT.OFF/RPT. -/RPT. +
Default: Depends on the transceiver version, as well as the setting of Set Mode Item 4 [ARS].
Set Mode Item 36 [PRI.RVT]
Function: Enables/disables the Priority Revert feature.
Available Values: RVT.OFF/RVT. ON
Default: RVT.OFF
See page ?? for details.
Set Mode Item 38 [RX MOD]
Function: Selects the receiving mode.
Available Values: AUTO/FM/AM
Default: AUTO (Mode automatically changes according to operating frequency)
Set Mode Item 37 [RXSAVE]
59/64
Vertex Standard Co., Ltd.
Advertisement
