Advertisement
Smart Search scan will eventually terminate, and the LCD will revert to Smart Search
Memory Channel "C."
5.
To recall the Smart Search memories, rotate the DIAL knob to choose from among the
frequencies stored by Smart Search.
6.
To return to normal operation, press the [VFO(PRI)] key.
R.F. Says: Smart Search is a great tool when visiting a city for the first time. You don't need to
spend hours looking up repeater frequencies from a reference guidebook. . .just ask your
VX-120/170 where the action is!
The VX-120/170 can be used to access a "node" (repeater or base station) which is tied into
the Vertex Standard WIRES
network, operating in the "SRG" (Sister Radio Group) mode. Details may be found at the
WIRES-II Web site: http://www.vxstd.com/en/wiresinfo-en/. This feature may also be used to
access other systems, as described below.
1.
Press the [0(SET)] key momentarily to activate the Internet Connection feature. The "%"
icon will appear in the upper right corner of the display.
2.
Press and hold in the [0(SET)] key for one second, then rotate the DIAL knob to select
the access number (ICOD "0" ~ "9," "A," "B," "C," "D," "E( )," "F(#),") corresponding to
™
the WIRES
node to which you wish to establish an Internet link (ask the node or
repeater owner/operator if you don't know the access number in the network). Now
press the PTT switch to exit from the selection mode.
3.
With the Internet Connection feature activated (as in step 1 above), the VX-120/170 will
generate a brief (0.1 second) DTMF tone according to your selection in step 2. This
DTMF tone is sent at the beginning of every transmission to establish or maintain the link
to the local WIRES
4.
To disable the Internet Connection feature, press the [0(SET)] key momentarily (the "%"
icon will disappear from the display).
R. F. Says: If other users report that you always have a DTMF "beep" at the beginning of
each transmission, and you are not operating in conjunction with Internet access, disable this
function via step (4) above.
You may access other Internet Link Systems (including WIRES
use a DTMF string for access.
1.
Load the DTMF tones which you wish to use for Internet-link access into a DTMF
Internet Connection feature
™
(Wide-Coverage Internet Repeater Enhancement System)
™
node operating in the SRG mode.
40/64
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
PERATING
TM
in the "FRG" mode) that
Vertex Standard Co., Ltd.
M
ANUAL
Advertisement
