Advertisement
FCC ID: K6620223X20
IC ID: 511B-20223X20
VX-120/170 O
M
PERATING
ANUAL
Available Values: 50MS (high speed)/100MS (low speed)
Default: 50MS
Set Mode Item 17 [DT WRT]
Function: Programming of the DTMF Autodialer.
See page ?? for details.
Set Mode Item 18 [EAI]
Function: Enables/Disables the Emergency Automatic ID (EAI) Feature.
Available Values: INT. 1M - INT.10M, INT.15M, INT.20M, INT.30M, INT.40M, INT. 50M, CON.
1M - CON.10M, CON.15M, CON.20M, CON.30M, CON.40M, CON. 50M, and OFF
Default: OFF
Set Mode Item 18 [ECS.CDR]
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page ?? for details.
Set Mode Item 19 [ECS.CDT]
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch.
See page ?? for details.
Set Mode Item 20 [EDG.BEP]
Function: Enables/Disables the Band-edge beeper while selecting the frequency via the
DIAL knob.
Available Values: BEP.OFF/ BEP. ON
Default: BEP.OFF
Set Mode Item 21 [EMG S]
Function: Selects the alarm(s) utilized when the Emergency function is engaged.
Available Values:
EMG.BEP/EMG.LMP/EMG.B+L/EMG.CWT/EMG.C+B/EMG.C+L/EMG.ALL/OFF
Default: EMG.B+L
EMG.BEP: Loud "Alarm" sounds.
EMG.LMP: The LCD/Keypad lamp flashes.
EMG.B+L: Loud "Alarm" sounds and the LCD/Keypad lamp flashes.
EMG.CWT: Transmits the Morse Code "SOS" (••• – – –•••) message on the air beginning one
minute after activation of the Emergency function.
EMG.C+B: Loud "Alarm" sounds and the Morse Code "SOS" (••• – – –•••) message is
transmitted on the air beginning one minute after activation of the Emergency function.
56/64
Vertex Standard Co., Ltd.
Advertisement
