Getting Started; Charging And Installing The Battery Pack - Sony TRV312 Operating Instructions Manual

Getting started

Charging and installing the battery pack

Before using your camcorder, you first need to charge and install the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
Charging the battery pack
Charge the battery pack on a flat place without vibration.
(1) Connect the AC power adaptor to a wall outlet.
(2) Align the right side of the battery pack with the line on the AC power
adaptor, then slide the battery pack in the direction of the arrow.
(3) Set the selector to CHARGE. The CHARGE lamp (orange) lights up.
Charging begins.
When charging is completed, the CHARGE lamp goes out. Unplug the unit from the
wall outlet, and then remove the battery pack and install it on the camcorder.
1
Charging time (in minutes)
Battery pack
Charging time*
NP-33 (supplied)
NP-60D
NP-C65
* Approximate minutes to charge an empty battery pack using the supplied AC power
adaptor (Lower temperatures require a longer charging time.)
2
Battery pack
NP-68
60
NP-80/80D
90
NP-98/98D
105
3
POWER CHARGE
Charging time*
125
190
215
7