Editing Onto Another Tape - Sony TRV312 Operating Instructions Manual

Editing onto another tape

You can create your own video program by editing with any other h 8 mm, H Hi8,
j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax
VCR that has video/audio inputs.
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
After connecting the camcorder to the VCR,
(1) Set the POWER switch to PLAYER.
(2) Insert a blank tape (or a tape you want to record over) into the VCR and
insert your recorded tape into the camcorder.
(3) Play back the recorded tape on the camcorder until you locate the point
where you want to start editing, then press P to put the camcorder in
playback pause mode.
(4) On the VCR, locate the recording start point and put the VCR in recording
pause mode.
(5) Press P on the camcorder and VCR simultaneously to start editing.
1
POWER
CAMERA
OFF
PLAYER
To edit more scenes
Repeat steps 3 to 5.
To stop editing
Press π on both the camcorder and VCR.
3,5
STOP REW
: Signal flow
PLAY FF PAUSE
47