Transfer Programs - Sartorius LMA110S Operating Instructions Manual

Transfer Programs

The analyzer has been designed for
easy uploading or downloading of all
programs from other Sartorius moisture
analyzers to the Mark 3 LTE. The fol-
lowing combination of analyzers with
the appropriate cable is capable of
transferring programs:
Mark 3 to Mark 3 (serial to serial,
null modem cable)
mark 3 to Mark 2 (serial to serial,
see Accessories on page 83)
Set the same communication parameters
on both analyzers:
§ Suggested settings: 9600 baud, 8 bits,
No parity, and 1 stop bit, CTS Off
To download programs from a Mark 3
LTE to another analyzer:
§ Install the appropriate cable between
the analyzers.
§ Turn the serial port On in serial port
menu (page 53).
P r o g r a m t r a n s f e r
1 ) M a r k 3 t o M a r k 3
2 ) M a r k 3 t o M a r k 2
66
0 5 / 0 1 / 2 0 1 1 0 2 : 4 2 P M
§ From the Security Menu screen, press
the 6 key or highlight Manage program
storage and press the Enter key to dis-
play the Manage program storage
screen.
§ (Mark 2 only—press Setup, Setup 2
menu, Prg Xmit and External input)
§ Press the 4 key for transfer programs.
§ Press the 1 key for Mark 3 to Mark 3 or
2 key for Mark 3 to Mark 3. After a con-
firmation screen, the display will show
the program transfer in progress.
§ Check the transfer in the receiving ana-
lyzer under Recall.
To upload programs to your Mark 3 LTE
from another analyzer, follow instruc-
tions on the downloading analyzer:
§ Install the appropriate cable between
the analyzers.
§ Turn the serial port On in serial port
menu (page 53).
§ (Mark 2 only—press Setup, Setup 2
menu, Prg Xmit and Output Programs)
§ The Mark 3 LTE will automatically
recognize receipt of the programs.
§ Check the transfer in the receiving
analyzer under Recall.