Displaying The Shot Mark Screen - Sony PMW-EX3 Operating Instructions Manual

1
Pause the playback or select a clip on
the thumbnail screen then press the
joystick or the jog dial.
The corresponding Clip Operation menu
pops up.
2
Select "EXPAND CLIP" from the Clip
Operation menu.
The EXPAND CLIP screen appears for the
clip in Pause mode or that you selected on the
thumbnail screen.
On the EXPAND CLIP screen displayed by using
the Clip Operation menu in Pause mode, the clip
is displayed with the finest possible partitions.
EXPAND CLIP screen
120min EXPAND CLIP
01 : 10 : 20 : 00 01 : 10 : 30 : 00
01 : 11 : 00 : 00 01 : 11 : 10 : 00
S1 S2
01 : 11 : 40 : 00 01 : 11 : 50 : 00
01 / JAN / 2007 10 : 53 S&Q Mot i on 29 / 24 f p s
JPAN0011 ( 1 )
HQ 1080 / 24 p
Detailed information for the clip is displayed at
the bottom of the screen.
The items other than the following are the same as
those on the normal thumbnail screen:
1.
Frame information
The following icons show the marking for the
frame at the cursor.
Index frame
Frame with shot mark 1 added
S1
S2 Frame with shot mark 2 added
The same icons may also be displayed below the
thumbnail image of each frame. If the frame has
multiple markings, one of the icons is displayed,
in the priority order of index frame, shot mark 1,
and shot mark 2.
Current frame number
0000123
01 : 10 : 40 : 00 01 : 10 : 50 : 00
01 : 11 : 20 : 00 01 : 11 : 30 : 00
01 : 12 : 00 : 00 01 : 12 : 10 : 00
S2 S1
TCR 01 : 10: 20 : 00
DUR 00 : 03 : 19 : 23
1 2
2.
Timecode indication
The timecode of the frame at the cursor is
displayed.
Clip Operation menu on the EXPAND CLIP
screen
When you select a frame on the EXPAND CLIP
screen and press the joystick or the jog dial, the
Clip Operation menu pops up to enable further
operations.
Item Function
EXPAND To decrease the number of
(COARSE) partitions of the clip
EXPAND To increase the number of
(FINE) partitions of the clip
PAUSE To set to Pause mode at the
selected frame
SET INDEX PIC To specify the selected frame for
the index frame of the clip (page
107)
SHOT MARK1 To add shot mark 1 to the selected
ADD frame (page 106)
SHOT MARK2 To add shot mark 2 to the selected
ADD frame (page 106)
SHOT MARK1 To delete shot mark 1 from the
DEL selected frame (page 106)
SHOT MARK2 To delete shot mark 2 from the
DEL selected frame (page 106)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 107)
Displaying the SHOT MARK
Screen
When one or more shot marks are recorded for a
single clip, the SHOT MARK screen permits you
to display only the marked frames as the
thumbnail images on the screen.
1
Select a clip on the thumbnail screen.
2
Press the joystick or the jog dial.
The Clip Operation menu pops up.
3
Select "SHOT MARK," "SHOT
MARK1," or "SHOT MARK2."
SHOT MARK: To display thumbnails only
of the frames marked with shot mark 1
and/or shot mark 2 recorded
SHOT MARK1: To display thumbnails only
of the frames marked with shot mark 1
Clip Operations 105