Sony PMW-EX3 Operating Instructions Manual page 130

OTHERS
Menu items
Trigger Mode
Setting whether to
trigger recording
start/stop for an
external device
connected to via
the i.LINK
connector
Country
Setting the area for
use
Video Format
Selecting the video
format
Clip
Setting for clip
name or deletion
Format Media
Formatting SxS
memory cards
1)
If clips cannot be played back, updating the
managerial file on the card may improve the
condition.
130 Setup Menu List
Subitems and setting values Contents
Internal / Both / External
NTSC Area / PAL Area
Country: NTSC Area
HQ 1080/60i
SP 1080/60i
HQ 1080/30P
HQ 1080/24P
SP 1080/24P
HQ 720/60P
HQ 720/30P
HQ 720/24P
Country: PAL Area
HQ 1080/50i
SP 1080/50i
HQ 1080/25P
HQ 720/50P
HQ 720/25P
Title Prefix
nnn_
(nnn=least three digits of the
serial number)
Number Set
000l to 9999
Update Media(A)/Media(B)
Execute / Cancel
Last Clip DEL
Execute / Cancel
All Clips DEL
Execute / Cancel
Media (A)
Execute / Cancel
Media (B)
Execute / Cancel
Internal: To activate recording start/stop operations only for
an SxS memory card in a built-in slot.
Both: To activate recording start/stop operations both for an
SxS memory card in a built-in slot and the external
recording device connected via the i.LINK connector.
External: To activate recording start/stop operations only for
the external recording device connected via the i.LINK
connector.
Select the color system for the area where you will use the
camcorder.
Note
The default setting is different among the sales areas.
United States and Canada: NTSC
Other areas: PAL
Select the video format (bit rate, picture size, frame rate, and
scan system in combination).
• Bit rate
HQ or SP
• Picture size
1080 or 720
• Frame rate
24, 25, 30, 50, or 60
• Scan system
i (interlace) or P (progressive)
Note
The default setting is different among the sales areas.
United States and Canada: HQ 1080/60i
Other areas: HQ 1080/50i
Set the first 4-alphanumeric part of the clip names.
You can use upper- and lowercase alphabets, numerics 0 to 9,
- (hyphen), and _ (underscore).
Set the second 4-numeric part of the clip name.
Select "Execute" to update the managerial file on the SxS
memory card in the selected slot.
Select "Execute" to delete the last recorded clip.
Select "Execute" to delete all clips on the active SxS memory
card.
Note
Clips to which you applied OK mark cannot be deleted.
Select "Execute" to format the SxS memory card in slot A.
Select "Execute" to format the SxS memory card in slot B.
1)