Adding/Deleting Shot Marks - Sony PMW-EX3 Operating Instructions Manual

SHOT MARK2: To display thumbnails only
of the frames marked with shot mark 2
SHOT MARK screen example
120min SHOT MARK
01 : 10 : 20 : 00 01 : 10 : 30 : 00
S1 S2
01 : 11 : 00 : 00 01 : 11 : 10 : 00
S1 S1
- - - - - -
01 / JAN / 2007 10 : 53 S&Q Mot i on 29 / 24 f p s
JPAN0011 ( 1 )
HQ 1080 / 24 p
The detailed information of the clip is displayed
at the bottom of the screen.
The items other than the following are the same as
those on the EXPAND CLIP screen:
1.
Timecode indication
The timecode of the frame at the cursor on the
SHOT MARK screen is displayed.
Clip Operation menu on the SHOT MARK
screen
When you select a frame on the SHOT MARK
screen and press the joystick or the jog dial, the
Clip Operation menu pops up to permit you
further operations.
Item Function
PAUSE To set to Pause mode at the selected
frame
SET INDEX PIC To specify the selected frame for the
index frame of the clip (page 107)
SHOT MARK1 To delete the shot mark 1 from the
DEL selected frame (page 106)
SHOT MARK2 To delete the shot mark 2 from the
DEL selected frame (page 106)
DIVIDE CLIP To divide the clip into two clips at
the selected frame (page 107)

Adding/Deleting Shot Marks

You can add shot marks to the clips after
recording or delete the recorded shot marks.
106 Clip Operations
0031 / 0031
01 : 10 : 40 : 00 01 : 10 : 50 : 00
S2 S1
- - - - - -
- - - - - -
TCR 01 : 12: 00 : 00
DUR 00 : 03 : 19 : 23
1
Adding a shot mark in Pause mode
1
Pause the playback at the frame to
which you wish to add a shot mark then
press the joystick or the jog dial.
The Clip Operation menu pops up.
2
Select "SHOT MARK1 ADD" or
"SHOT MARK2 ADD" from the Clip
Operation menu.
The information screen for the selected frame
appears, and a confirmation message is
displayed below the image.
3
Select "Execute."
Adding a shot mark on the EXPAND CLIP
screen
1
Select the frame to which you wish to
add a shot mark on the EXPAND CLIP
screen then press the joystick or the jog
dial.
The Clip Operation menu pops up.
2
Select "SHOT MARK1 ADD" or
"SHOT MARK2 ADD" from the Clip
Operation menu.
The information screen for the selected frame
appears, and a confirmation message is
displayed below the image.
3
Select "Execute."
Deleting a shot mark
You can delete shot marks on the EXPAND CLIP
screen (page 104) or on the SHOT MARK screen
(page 105).
1
Select a frame from which you wish to
delete the shot mark on the EXPAND
CLIP screen or the SHOT MARK
screen then press the joystick or the jog
dial.
The Clip Operation menu pops up.
2
Select the "SHOT MARK1 DEL" or
"SHOT MARK2 DEL" from the Clip
Operation menu.