Table of Contents
Advertisement
Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of electrocution
or fire.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it
Never connect the product to a rheostat (variable resistor) or dimmer circuit,
even if the rheostat or dimmer channel serves only as a 0 to 100% switch
Fuse Replacement
1.
Disconnect the product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove the blown fuse.
4.
Replace with a fuse of the same type and rating.
Screw the fuse holder cap back in place and reconnect power.
·
Disconnect the product from power before replacing the fuse.
Always replace a blown fuse with another of the same type and rating
Mounting
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes
Orientation
The 290W LED Spot may be mounted in any position; however, make sure adequate
ventilation is provided around the product
Rigging
Before deciding on a location for the product, always make sure there is easy access to
the product for maintenance and programming purposes.
www.leahualight.com
6
Advertisement
Table of Contents
