Table of Contents
Advertisement
Configuration (DMX)
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX
input socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the product's channels.
The 200W LED spot uses up to 16 DMX channels in its 16-channel DMX mode, which
defines the highest configurable address to 497.
To select the starting address, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to choose Address.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select the starting address.
Press <ENTER>
DMX Personalities
The 200W LED Spot has two DMX personalities, a 16-channel personality and a
10-channel personality.
To choose which DMX personality to use, follow the steps below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to choose Run Mode.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select DMX.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> until either 16CH (to choose the 16-channel personality)
or 10CH (to choose the 10-channel personality) shows on the display.
Press <ENTER>
www.leahualight.com
18
Advertisement
Table of Contents
