leahua 1440RGB User Manual page 4

Led bar strobe
Table of Contents

Advertisement

Always make sure that the voltage of the outlet to which you are
connecting the product is within the range stated on the decal or rear panel of the
product.
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
Be sure that no ventilation slots on the product's housing are blocked.
Never connect the product to a dimmer or rheostat.
Make sure to replace the fuse with another of the same type and rating.
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
The maximum ambient temperature (Ta) is 104 ° F (40 ° C). Do not operate the
product at higher temperatures.
In the event of a serious operating problem, stop using the product immediately.
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product, give this document
to the next owner
www.leahualight.com
3

Advertisement

Table of Contents
loading

Table of Contents