Configuration (Standalone); Sound-Active Mode; Automatic Mode - leahua 1440RGB User Manual

Configuration(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to power
Never connect a product that is operating in any standalone mode (either
Automatic or Sound-Active) to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere with the DMX signals
from the controller

Sound-Active Mode

To enable the Sound-Active mode, do the following.
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Sound.
5. Press <ENTER>.

Automatic Mode

To enable the Automatic mode, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to choose Run Mode.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select Auto.
Press <ENTER>
www.leahualight.com 19