PIONEER DJ DDJ-200 Operating Instructions Manual page 72

Press the Performance Pads on deck 1 (left) to change the
Demo mode setting.
The set value is indicated by which pad is lit.
1: Demo mode is switched off.
2: Demo mode starts when you don't use the unit for 1 minute.
3: Demo mode starts when you don't use the unit for 5 minutes.
4: Demo mode starts when you don't use the unit for 10 minutes.
• After changing the setting, the setting is saved. While saving the setting, the
bottom row of Performance Pads on the left deck flashes. In this case, wait
until these pads change from flashing to lit. If the USB cable is disconnected
while the pads are flashing, the setting may not be saved.
4 Disconnect the USB cable from the device supplying power to this
unit.
Utilities mode is exited.
Settings on the unit
72
En