Using Manual Loop - PIONEER DJ DDJ-200 Operating Instructions Manual

Using Manual Loop

You can choose the section you want to loop.
• When the Quantize function is turned on, you might notice a slight
delay as the loop synchronizes to the beat.
1 Tap [LOOP] on the main screen of WeDJ for iPhone.
2 Tap [LOOP] again to display the [LOOP] panel.
3 Turn on Manual Loop mode on WeDJ for iPhone.
When [MANUAL] shows instead of [AUTO] as it does in the following picture,
tap [MANUAL] to switch to Manual Loop mode.
Functions for Manual Loop are set to Performance Pads as follows:
1: Setting Loop In point, 2: Setting Loop Out point, 3: Loop Exit / Reloop,
4: not used, 5: Loop Cutter, 6: Loop Double, 7: not used, 8: not used
1 2 3
5 6 7
27
En
WeDJ for iPhone
4
8