Loading A Track Into A Sampler Slot - PIONEER DJ DDJ-200 Operating Instructions Manual

2 Press the Performance Pad that has a Release FX assigned to it.
The effect turns off, and the Release FX is added.
Using the Sampler
You can use the Performance Pads to play tracks or sounds assigned
to the Sampler slots.
 Preparing to use the Sampler
Mark the [SAMPLER] check box at the top of the rekordbox dj screen.
• The [SAMPLER] panel is displayed.
 Loading a track into a Sampler slot
1 Click [SAMPLER] at the bottom of the rekordbox dj screen to enter
[SAMPLER] mode.
2 Click the button at the right of [BANK] on the [SAMPLER] panel to
change the Sampler bank.
In rekordbox dj, the sampler has 4 banks, and each bank has 16 slots.
3 Select a track from the track list to load into the Sampler slot.
4 Press a Performance Pad while holding the [SHIFT] button.
The selected track is loaded into the Sampler slot.
• Loading by overwriting a Sampler slot that's already loaded may not be
possible depending on the [Preferences] settings in rekordbox.
65
En
rekordbox