PIONEER DJ DDJ-200 Operating Instructions Manual page 62

• You can clear Hot Cue points by pressing a Performance Pad while holding
the [SHIFT] button.
 Setting and calling up Beat Loop
1 Click [BEAT LOOP] at the bottom of the rekordbox dj screen to
enter [BEAT LOOP] mode.
2 Press a Performance Pad during playback.
Loop playback starts with the number of beats set on the pad you pressed.
 Read more: Using Beat Loop (page 63)
3 Click [HOT CUE] at the bottom of the rekordbox dj screen to enter
[HOT CUE] mode.
4 Press a Performance Pad to set a loop during loop playback.
5 Press the Performance Pad.
Loop playback starts from the Loop In point.
• You can clear the loop by pressing the Performance Pad while holding the
[SHIFT] button.
62
En
rekordbox