R&S TSMA6-BP Getting Started page 15

®
R&S TSMA6-BP
Figure 4-6: R&S TSMA6-BP
1 = Collar screws for connecting R&S TSME6
2 = Aux 1 / Aux 2 (Auxiliary power out for connecting R&S TSME6 / R&S TSME30DC via
power cable R&S TSME-ZYC (R&S No. 1514.7290.02)
3 = DC IN
4 = Status LEDs for battery 1 and 2
2. Attach the R&S TSME6 with the bottom side on top of the R&S TSMA6-BP.
3. Move the R&S TSME6 to the back side, until you hear a click when the con-
nectors are locked.
Figure 4-7: Connected R&S TSME6 and R&S TSMA6-BP
1 = R&S TSMA6-BP
2 = R&S TSME6
4. Connect the R&S TSME6 DC IN with AUX1 or AUX 2 port of R&S TSMA6-BP
(see Figure 4-6) with the related DC cable (R&S TSME-ZYC, R&S No.
1514.7290.02 for up to 2 R&S TSME6 devices).
Getting Started 4900.9030.02 ─ 03
Connecting the R&S TSMA6-BP with R&S TSME6
Preparing for Use
15