Connecting The R&S Tsma6-Bp With R&Stsma6 - R&S TSMA6-BP Getting Started

®
R&S TSMA6-BP
4.4 Connecting the R&S TSMA6-BP with R&S
TSMA6
To use the R&S TSMA6 with the R&S TSMA6-BP, the following steps must be
performed.
1. Screw the collar screws (1) on the top of the R&S TSMA6-BP with a Torx 8
screw driver.
● Torque: 0.66 Nm ± 0.05 Nm
Figure 4-3: R&S TSMA6-BP
1 = Collar screws for connecting R&S TSMA6
2 = Power connector for R&S TSMA6
3 = Aux 1 / Aux 2
4 = DC IN
5 = Status LEDs for battery 1 and 2
2. Remove the cover cap from the power connector of the R&S TSMA6.
Getting Started 4900.9030.02 ─ 03
Connecting the R&S TSMA6-BP with R&S TSMA6
Preparing for Use
12