Connecting The R&S Tsma6-Bp With R&Stsme6 - R&S TSMA6-BP Getting Started

®
R&S TSMA6-BP
Disconnect Devices
To disconnect the R&S TSMA6-BP and the R&S TSMA6 base unit, lift the release
button (1) on both sides of the R&S TSMA6 base unit and slide it until the device
is released (2).
Figure 4-5: Disconnect devices
4.5 Connecting the R&S TSMA6-BP with R&S
TSME6
1. Screw the collar screws (1) on the top of the R&S TSMA6-BP with a Torx 8
screw driver.
● Torque: 0.66 Nm ± 0.05 Nm
Getting Started 4900.9030.02 ─ 03
Connecting the R&S TSMA6-BP with R&S TSME6
Preparing for Use
14