Oracle Sun Fire X4470M2 Product Notes page 35

Bug ID Description
Fault Management Architecture (FMA) message returns the DIMM product part number as 001-
0003-01, and not as a proper vendor identification number (for example, M393B2G70BH0-YK0).
Affected Software:
■ Oracle ILOM 3.1.2.2.4 r78320
■ Oracle ILOM 3.1.2.24.a r75561
■ Oracle ILOM 3.1.2.24.b r79266
Fix Available:
Oracle ILOM 3.1.2.24.c r81341
When permitted_power exceeds 2560W, Oracle ILOM event log might report incorrect power
15814174
unit reading.
Issue:
Oracle ILOM event logs may report incorrect Power Unit /SYS/VPS reading. For example: 122
| 08/31/2012 | 21:10:20 | Power Unit /SYS/VPS | Upper Non-critical going low | Reading 70 <
Threshold 280 Watts.
128 | 08/31/2012 | 21:26:14 | Power Unit /SYS/VPS | Upper Non-critical going high | Reading 450 >
Threshold 270 Watts.
Affected Software:
■ Oracle ILOM 3.1.2.2.4 r78320
■ Oracle ILOM 3.1.2.24.a r75561
■ Oracle ILOM 3.1.2.24.b r79266
Fix Available:
ILOM 3.1.2.24.c r81341
15623738 NIC port enumeration might change after one or more PCIe cards are added.
Issue:
Because PCIe bus numbering is dynamic on the Sun Server X2-4, after you add one or more PCIe
cards to the server, the network interface card (NIC) port enumeration might change. For example,
igb2, igb3 might change to igb4, igb5.
Affected Operating System:
■ All versions of Oracle Solaris
Fix Available:
This is intended product behavior. To workaround the issue, enter the following commands:
#echo #path_to_inst_bootstrap_1 > /etc/path_to_inst #reboot
15727517 Unattended operating system installation mode is not supported on Oracle Hardware
Installation Assistant 2.5.7.2.
Issue:
Chapter 1 • Sun Server X2-4 Product Notes
Resolved Issues
35