The Oxo Suspension Adapters Patent - INOKIM OXO User Manual Manual

THE OXO SUSPENSION ADAPTERS PATENT

The OXO has a unique patent on the adjustable suspension system.
The OXO Suspension Adapter Patent : OSAP
The OSAP allows you to alternate the suspension position:
LOW POSITION is the default, for better stability mainly at higher speeds
HIGH POSITION is for larger suspension travel, mainly in rough terrain
WHEN REPLACING THE OSAP PAY ATTENTION:
Don't remove the wheel from the arm!
Work on the side of the suspension arm which is
connected to the scooter body
17
REPLACING OSAP FROM HIGH TO LOW
In order to turn your OXO into LOW POSITION use the LOW POSITION kit:
It is recommended that you place the OXO on an uplifted surface such as a
chair or a box, so that the main body is firmly set on the surface and the two
wheels are in the air
Remove the rubber caps and use the 19 mm socket spanner to release the
suspension arms from their location
Once the suspension arm is out of its place, replace the OSAP from LOW to
HIGH in each suspension arm. Keep front and rear OSAP in their respective
places. Assemble back in reverse order. You can use the sketch below for
assistance
OSAP rear
Suspension arm
19mm washer
Bolt
Rubber cap
18