Searching For A Scene By Date Of Recording (Date Search) - Sony HANDYCAM HDR-HC9 Operating Manual

4
/ During playback, press ZERO
SET MEMORY on the Remote
Commander at a point you want
to locate later on.
Tile tape counter is reset to "0:00:00"
and ÷0÷ appears on the screen.
HOV _Oi +o*
_ _ []EZN] _ EN!N_
If the tape counter is not displayed,
press DISPLAY.
2
Press STOP when you want to
stop playback.
3
Press _I_IREW.
Tile tape stops autom,'-ttic,'-flly when the
tape counter reaches "O:O0:(X)."
Tile I:qgecounter relurns to the time
code display, and the zero set memory
display disappears.
4
Press PLAY.
Playb_ck
starts lrom
the
point
designated "0:00:00" on the tape
co[inter.
• Zero set memory will not thnction correctly if
there is a blank section between recorded
sections on the tape.
You can locate the point where the
recording date changes.
Slide the POWER switch repeatedly tu
turn on the PLAY/EDIT lalnp (p. 28).
4
| Press SEARCH M. on the Remote
Commander.
2
P ress I.,_1 (Previous)/l_l_,t (Next) to
select a recording date.
_ 60min _ O:O0:O0:O0
_DVI080 60min
DATE .Ol
=.
"10
To cancel t he operation
Press ZERO SET MEMORY ag_dn before
rewinding.
O Notes
• There may be a discrepmlcy ot several seconds
bet\v_n tile time code and tile tape counter,
I0 cancel the operation
Press STOP.
O Notes
• Tile Date search will not tullclion correctly
when there is a blank seclion between recorded
Sections on the tape.
33