Sony HANDYCAM HDR-HC9 Operating Manual page 48

_gANERA SET mesh (Co_i_e_}
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
0 Notes
• Portions ot the screen where brighmess is about
lO0 IRE or higher may appear overexposed.
"_° Tips
• IRE repre_nts the screen brightness.
When you set IHISTOGRAMI to IONI, the
[HISTOGRAM]/a graph to display a
distribution of tones ill your picture)
window appears on tile screen.
This item is useful when you adjust
exposure. You call a([just tile [EXPOSURE]
or [AE SHIFT] checking tile
[HISTOGRAM] window. Tile
[HISTOGRAM] will not be recorded on a
tape or "Memory Stick Duo.'
Darker Brighter
Brightness
"_" Tips
• The letl alva onfile graph shows the darker
areas ot the picture while the right area shows
lhe
brighler area,,.
A still image is recorded after about 10
seconds.
Press PHOTO when [SELF-TIMER] is set
to ION] and @ appears.
To cancel the count down, touch [RESET].
To cancel the self-timer, select [OFF].
"_° Tips
• You can also operate by pressing PHOTO on
lhe Remole Comnlander (p, 106).
You
Call select tile
maximum
zoom level
it/
case you want to zoom to a level greater
than 10 x/the default setting) while
recording on a tape. Note that tile image
quality decreases when you are using tile
digital zoom.
W_T
The right side of the bar shows the digital
zooming fi,ctor. The zooming zone
appears when you select tile zooming
level.
OFF
Lipto 10 x zoom is pcrlbrmcd optically.
211×
Up to 10 x zoom is perik)m/ed optically,
and after that, up to 2(1x ZOO1]/ iS
performed digitally.
You can compensate for camera shake (Tile
default setting is IONI). Set
ISTEADYSHOT] to IOFF] ('_") when
using :1 tripod (optional), then the image
beconles naturah
48