Dell EMC ME4 Series User Manual page 13

Message Message
number
1105 Failed to run command "{cmd}" on storage system at {system}:
{err}
2001 Volume {volume}({name}) is already unmapped.
2002 No data found for {volume}replication image {imageSn} ({err}).
2003 querySyncStatus: No data found for replication image {imageSn}
for volume {vol} ({err}).
NOTE: You can expect to see certain errors in the log file when commands are executed to ensure that volumes are in a
particular state if the volumes are already in that state. These errors are -3395 (Replication is not active on this
secondary volume) and -10306 (Unable to set the specified volume as the primary volume because
the specified volume is already a primary volume). You can safely disregard these error messages if they occur
under these circumstances.
Suggested action
Verify the IP address configuration on the storage
system and on the host, and check network connectivity.
SRM requested that a volume be prepared for failover,
but the volume is already prepared.
Verify that replication has started for volume {volume}.
Verify that replication has started for the specified
volume.
Troubleshooting 13