Table of Contents
Advertisement
Solid wood / tiled / glass
worktops
a Worktop
b Cooktop
c Gap
d Wooden frame 13 mm (not supplied
with appliance)
As the ceramic glass and the worktop
cut-out have a certain dimensional
tolerance, the size of gap can vary
(min. 1 mm).
Preparing the worktop
Make the worktop cut-out as shown
in "Building-in dimensions". Observe
the safety distances (see "Safety
distances").
Solid wood, tiled and glass worktops:
Fix the wooden frame 7 mm below
the top edge of the worktop (see
diagram).
Connecting the mains
connection cable to the
appliance
The mains connection cable must be
connected by a suitably qualified and
competent electrician in accordance
with current local and national safety
regulations.
Follow the instructions in the wiring
diagram (see "Electrical connection -
Wiring diagram").
Installing the cooktop
Feed the mains connection cable
down through the cut-out.
Centre the cooktop in the cut-out.
Connect the cooktop to the mains
electricity supply.
Check that the cooktop works.
Seal the remaining gap with a
silicone sealant that is heat-resistant
to at least 160 °C.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone, and observe the
sealant manufacturer's instructions.
Installation
57
Hide quick links:
Advertisement
Table of Contents
