Installation Notes - Miele KM 6324-1 Operating And Installation Instructions

Installation notes

Flush fit cooktops are only suitable for
installation in natural stone (granite,
marble), tiled or solid wood worktops.
Certain models are suitable for
building into glass worktops - please
see advice under "Building-in
dimensions". When using a worktop
made from any other material, please
check first with the worktop
manufacturer that it is suitable for
installing a flush fit cooktop.
The internal width of the base unit
must be at least as wide as the
internal cut-out width for the cooktop
(see "Building-in dimensions"). This is
to ensure that the casing can be easily
removed for maintenance. If the
underside of the cooktop is not freely
accessible after installation, any
sealant used to plug the gaps around
the appliance must be removed to
enable the cooktop to be lifted out of
the cut-out should this be necessary.
52
The cooktop can be installed
– in a suitable cut-out in a natural stone
worktop.
– in a suitable cut-out in a tiled or solid
wood worktop with a wooden
support frame. The frame must be
provided on site, and is not supplied
with the appliance.