Replacing The Travel Locks - Carefree FIESTA Service Manual

M P A
ANUAL ATIO WNINGS
R
EPLACING THE
These instructions apply to the standard and Fiesta HD travel locks. The Fiesta HD travel locks can be
used as an upgrade to existing Spirit and Fiesta awnings (part number 901096HD).
1. Fully extend the awning.
2. Raise the awning until the rivets of the travel lock are exposed
inside the channel.
3. Drill out the rivets and remove the old lock.
4. Clean the surface of the channel.
5. Remove the release paper and attach the abrasion pad to the
channel. Pad should be centered between the holes.
6. Attach the new lock with the two (2) 3/16" pop rivets provided. You
will need a pop rivet tool for this.
10
Service Manual
T L
RAVEL OCKS
Carefree of Colorado
Drill Out Rivets
Remove Old Lock
Abrasion Pad
(center between
holes in channel)
3/16" Pop Rivets
New Travel Lock
052876-301r5
SF028