Accessory Attachments - Sony DVW-970/970P Operation Manual

2-2 Accessory Attachments

a Shoulder strap posts
Attach the supplied shoulder strap to these posts.
For details, see "7-7 Attaching/Detaching the Shoulder
Strap" on page 117.
b Light shoe
Attach an optional accessory such as a video light to this
shoe.
c LIGHT connector (2-pin, female)
Connect the cable of an Anton Bauer Ultralight System
attached to the light shoe. The system operates with lights
powered by 12 V, with a maximum power consumption of
50 W.
d Lens mount (special bayonet mount)
Use this for mounting the lens.
e Lens locking lever
After inserting the lens in the lens mount, rotate the lens
mount ring with this lever to lock the lens in position.
f Lens mount cap
Remove this cap by pushing up the lens locking lever.
When no lens is mounted, keep this cap fitted for
protection from dust.
g LENS connector (12-pin)
Fit the lens cable to this connector. Contact your Sony
representative for more information about the lens you can
use.
a Shoulder strap posts
b Light shoe
i Shoulder pad h Tripod mount
Lens cable clamp
c LIGHT connector
d Lens mount
e Lens locking lever
f Lens mount cap
g LENS connector
h Tripod mount
When using the camcorder on a tripod, attach the tripod
adaptor (optional).
i Shoulder pad
You can move the shoulder pad forwards or backwards by
raising up the shoulder pad locking lever. Do this to ensure
the best balance when shooting with the camcorder on
your shoulder.
For details, see "7-8 Adjusting the Shoulder Pad Position"
on page 118.
15
Accessory Attachments