Sony DVW-970/970P Operation Manual page 149

No. Page Item
M15 FUNCTION 3 WHT FILTER INH
COLOR BAR SEL
REC TALLY
COLOR VF INPUT
USER & ALL ONLY
RM COMMON
MEMORY
RM REC START
REC INH. WITH
CCU
EXT VTR REC CTL OFF/ON
M16 GENLOCK GENLOCK
RETURN VIDEO
GL H PHASE
GL SC PHASE
GL SC 0/180 SEL
M17 ND COMP ND OFFSET
ADJUST
CLEAR ND
OFFSET
M18 AUTO SHADING AUTO BLK
SHADING
RESET BLK SHD
TEST OUT SELECT ENC/R/G/B
MASTER GAIN
(TMP)
M19 VANC RX UMID LINE
Settings Default
OFF/ON OFF
SMPTE/EBU/SNG SMPTE
(DVW-
970)
EBU
(DVW-
970P)
UPPER/BOTH UPPER
COMP/VBS/BOTH COMP
OFF/ON OFF
OFF/ON OFF
RM/CAM/PARA RM
OFF/ON ON
OFF
OFF/ON ON
OFF/ON OFF
(–99 to +99) 0
(–99 to +99) 0
0/180 180
OFF/ON —
— EXEC
EXEC EXEC
EXEC EXEC
ENC
–3/0/3/6/9/12/18/ 0 dB
24/30/36/42/48 dB
0/12/13/15/16/17/ 0
18/19 (DVW-970)
0/9/10/12/13/15/16/
17/18 (DVW-970P)
Description
Turns on and off the function which inhibits
independent white memory for each filter
position.
Selects the color bar type.
Selects whether to light the upper tally
indicator only, or both upper and lower tally
indicators.
For video input selection when a color
viewfinder is used
Selects whether to show only USER, USER
MENU CUSTOMIZE, and ALL menus in the
top menu.
Selects whether or not to share settings for
when an RM remote control unit is connected
and when the unit is used alone.
Selects which VTR START/STOP buttons (on
the RM, camera, or both) are enabled when
an RM-series remote control unit is
connected.
Selects whether to disable recording
operations when a CCU is connected. A
large viewfinder cannot be used with the OFF
setting.
Selects whether to synchronize recording
with an external VTR via a CCZ cable when
the CA-702 is connected.
Turns genlock on and off.
Turns return video on and off.
Adjusts the genlock H phase.
Adjusts the genlock subcarrier phase.
For coarse adjustment of the genlock
subcarrier phase.
Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
Clears ND filter color compensation values.
Executes the auto black shooting function.
Clears black shooting compensation values.
Selects the signal output to the TEST OUT
connector.
Temporarily sets the master gain value.
Selects the line on which the UMID is to be
recorded.
149
Menu List