Table of Contents
Advertisement
No.
Page
Item
M04
BATTERY
BEFORE END 1
END 1
BEFORE END 2
END 2
BEFORE END 3
END 3
BATT REMAIN
DISP
M05
AUDIO-1
AUDIO OUT (F/R)
REC AUDIO OUT
CA-701 AUDIO IN
AUDIO CH3/4
MODE
REAR XLR AUTO
FRONT MIC REF
REAR MIC REF
Settings
Default
5/10/15 to 95/100%
5%
(in 5% steps)
0/1/2/3/4/5%
0%
11.0 to 17.0 V
11.3
(in 0.1 V steps)
10.5 to 11.5 V
11.0
(in 0.1 V steps)
11.0 to 17.0 V
11.8
(in 0.1 V steps)
10.5 to 14.0 V
11.0
(in 0.1 V steps)
1/2/3
1
CUE/EE
EE
EE/SAVE
EE
ENABL/DSABL
ENABL
CH1/2/SW
SW
OFF/ON
OFF
–60 dB/–50 dB/–40
–60 dB
dB
–60 dB/–50 dB/–40
–60 dB
dB
Description
Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
warning level just before the battery ends.
Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage warning
level just before the battery ends.
Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage level at
which the battery ends and the camcorder
stops operation, just before the battery ends.
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
warning level just before the battery ends.
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
1: Standard mode
2: LCD remaining indication mode: One
the LCD indicates 10% for a battery
classified in <Others..., EXT DC> type.
3: ANTON mode: Remaining detection of the
ANTON type is made even for a battery
classified in <SONY> type.
Selects the audio output signal during FF/
REW.
CUE: cue audio signal
EE: Input signal
Selects the audio output signal during
recording.
EE: Input signal
SAVE: Not to outputl
When a CA-701 camera adaptor is
connected, select whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
Selects the sources to be recorded to
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
Turns the XLR connection automatic
detection on/off .
Sets the reference level of the front
microphone.
Sets the reference level when the AUDIO IN
CH1 or CH2 connector is set to MIC.
x
on
143
Menu List
Advertisement
Table of Contents
