Troubleshooting - Sony Cyber-Shot DSC-T11 Operating Instructions Manual

Troubleshooting

If you experience trouble with your camera,
try the following solutions.
1 First check the items on the tables below.
If code displays "C:ss:ss"
appear on the LCD screen, the
self-diagnosis display function is
working (page 107).
Battery pack and power
Symptom
You cannot charge the
battery pack.
The /CHG lamp flashes
when charging a battery
pack.
The /CHG lamp does not
light up when charging a
battery pack.
Troubleshooting
2 Should your camera still not work
properly, press the RESET button on the
lower right side of the control button
using a fine-tipped object, then turn on
the power again. (All the settings
including date and time are cleared.)
Cause
• The camera is turned on.
• The battery pack is not installed correctly.
• The battery pack is not installed correctly.
• The battery pack is discharged.
• The battery pack has malfunctioned.
• The AC Adaptor is disconnected.
• The AC Adaptor has malfunctioned.
• The battery pack is not installed correctly.
• The battery pack is discharged.
• The battery pack is completely charged.
• The camera is not properly installed to the USB
cradle.
3 Should your camera still not work
properly, consult your Sony dealer or
local authorized Sony service facility.
RESET button
Solution
p Turn the camera off (page 16).
p Install the battery pack correctly (page 11).
p Install the battery pack correctly (page 11).
p Re-insert the AC Adaptor and then charge the battery pack
(page 11).
p Consult your Sony dealer or local authorized Sony service
facility.
p Properly connect the AC Adaptor (page 11).
p Consult your Sony dealer or local authorized Sony service
facility.
p Install the battery pack correctly (page 11).
p Re-insert the AC Adaptor and then charge the battery pack
(page 11).
—
p Properly install the camera (page 10).
95