Setting The Date And Time - Sony Cyber-Shot DSC-T11 Operating Instructions Manual

Setting the date and time

Mode switch
1
, Set the mode switch to
• You can also carry out this operation when the
mode switch is set to or .
• To change the date and time on the Setup
screen, select [Clock Set] in
2
(pages 44 and 115), and perform the procedure
from step 3.
POWER button
POWER
2
. , Press the POWER button to
turn on the camera.
The POWER lamp (green) lights up and the
Clock Set screen appears on the LCD
(Setup 2)
screen.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2004 / / 12 : 00
1 1 OK
AM
Cancel
, Select the desired date display
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery (page 117),
Clock Set
2004 / 1 / 1 12
3
format with v/V on the control
button, then press z.
which provides the power for saving the time
data, ever becomes low, the Clock Set screen
will appear again. When this happens, reset the
date and time, by starting from step 3 above.
Y/M/D
M/D/Y
D/M/Y
: 00
OK
AM
17