Install Wise Studio And Configure End Devices - Advantech WISE-4210 Series User Manual

4.3

Install WISE Studio and Configure End Devices

Step 1. Download and install WISE Studio through
https://support.advantech.com/support/new_default.aspx
Step 2. Execute WISE Studio
Step 3. Power up WISE-4210 series by batteries or line power.
Step 4. Using USB cable to communicate WISE-4210 series between the computer.
(Please take note the USB cable is not able to power up the device.)
Step 5. Clicking "Go to Configuration" while it shows "available USB-Serial" in USB-
Serial box. (If device cannot be connected through USB, please install CP210x USB
to UART Bridge VCP Drivers from the following website:
https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-
drivers)
Step 6. Click "Connect" to access the end device.
Step 7. Once everything is all set, you are successfully into configuration page.
37 WISE-4210 Series User Manual