I/O Units; Figure 3.14Wise-4210 Battery Switch - Advantech WISE-4210 Series User Manual

Open the rubber cover on the side of WISE module, there is a battery switch to turn
on or turn off the battery power supply.
Note! This switch is only available for WISE-4210-Sxxx nodes, not for WISE-
4210-AP.
Note! Battery needs to order separately

3.3.3

I/O Units

WISE-4210 uses a plug-in screw terminal block for the interface between WISE-4210
and field devices. The following information is critical when connecting electrical
devices to I/O modules.
 Use the correct wire gauge (note that the terminal block accepts wires from 0.5
to 2.5 mm)
 Use a continuous length of wire (do not join separate wires to form a continuous
length)
 Use the shortest wire length possible
 Use wire trays for routing wherever possible
 Avoid running wires near to high-energy wiring
Avoid running input wiring near output wiring

Avoid creating sharp bends or kinks in the wires

WISE-4210 Series User Manual
Figure 3.14 WISE-4210 Battery Switch
1760002647-01 3.6V/2500mAh AA Cylindrical Battery (non-
rechargeable)
32