General Description; Craft Identification Number (Cin); Explanation Of Safety Labels - Ockelbo B18 Series Owner's Manual

wind with a danger of unusual waves and gusts. These are dangerous conditions that
necessitate a skilled and fit crew and a well-maintained boat.
If your craft is equipped with a life raft, study its instructions carefully. The boat must be
equipped with the appropriate safety equipment (life vests, safety harnesses, etc.) as
required for the boat type and the weather conditions. In some countries, this
equipment is compulsory. The crew must be familiar with the correct use and operation
of all safety equipment and be able to handle the boat in emergencies (including rescuing
a person who has fallen overboard, towing, etc.). Yachting schools and clubs arrange
rescue training and practice opportunities on a regular basis. Everyone aboard the craft
should wear a suitable personal flotation device (life vest or boating vest). Please note
that in some countries national boating regulations may require everyone aboard to
wear a personal flotation device whenever on board.
Finally, please pay respect to the environment by complying with good practise as well as
local, national and international (Marpol) regulations. Thank you!
Please retain this manual and provide it to the boat's next owner if you sell your
boat.
1.2 G
ENERAL DESCRIPTION
The boat is primarily intended for private and leisure use. The boat is of open type and
has a single hull type entirely made of aluminum, so are the handrails and cleats. The boat
is designed and built according to standards for CE approval in category C and is
designed to be propelled by a single outboard engine.
1.3 C
RAFT IDENTIFICATION NUMBER
The Craft Identification Number is located on the starboard side of the transom. See
chapter 7, drawing 1, position 14. The CIN must be included in all correspondence
related to the boat, such as when buying parts or registering an insurance.
1.4 E
XPLANATION OF SAFETY LABELS
Mounted at key locations throughout your boat and duplicated in this manual are labels
which advise the owner/operator of imperative safety precautions to follow when
operating or servicing equipment. Study chapter 3.7 to learn their location. Learn to
recognize the degree of precaution and understand the explanations of safety prior to
reading this manual. These precautions are not all-inclusive. Always follow recommended
instructions and think in general while operating your boat.

Do not remove or obstruct any safety label.

Replace any label which becomes illegible. Replacement safety labels can be
obtained by calling your dealer
(CIN)
1. INTRODUCTION
__PAGE 4