Ockelbo B18 Series Owner's Manual page 24

waves could flood the boat and sink it. Use loose fenders between the boat hull and any
close objects such as other boats when there is a risk of contact.
If the boat is left unattended, turn off the electric power using the main power switch
(for location and function, see chapter 5.3).
Never leave your boat unattended for longer periods. Observe the floating position of
the boat so that the water line is at a normal level. Check for any water in the bilge. If
large volumes of water accumulate in the bilge or at deck (for instance due to leakage,
broken bilge pump, lack of electric power, flooding or blocked deck drains), the boat
may be seriously damaged or sink as the deck drain system may not work as intended.
Examples, mooring:
Anchoring:
When you anchor or land temporarily in a natural harbor, ensure sufficient water depth.
Drop the anchor at a sufficient distance from shore, allowing time for the anchor to
drop and grip and to release enough anchor rope/chain. The anchor rope/chain length
should be at least 4-5 times the water depth. Choosing the right type of anchor and
anchoring method requires boating experience, ask for advice when needed.
2. OPERATING THE BOAT
__PAGE 16