Table of Contents
Advertisement
2
Scan Mode Tab
You can specify the transmission method of the document.
l [Color/File]:
Specifies the color mode, data format.
Settings
m
Color mode: Full Color, Grayscale, or Monochrome
m
File Format: PDF, TIFF, or JPEG
NOTE
è
If the transmission destination is set to a mailbox, the file format is
specified when the data is downloaded from the mailbox to the
computer. You do not have to set the format using [File Format] on
this screen.
l [Resolution]:
Specifies the resolution.
Settings:
200 dpi, 300 dpi, 400 dpi, 600 dpi
l [Background Remove]:
Enter settings concerning background remove and document
brightness.
Background Remove
Enter settings concerning background remove.
Settings:
Auto or manual
(-5 (maximum removal) to +2 (minimum removal): 8 levels)
l [Scan Size]:
Specify the scan size of the document.
You can also specify an arbitrary size (in unit of millimeter or 1/16
inch). In addition, you can also specify the erase position and erase
width.
2-8
Using the Scanner Mode
CN3102Pro
Advertisement
Table of Contents
